Size guide

Find the right fit.

Three rooms, eleven sub-categories. Measure once, choose once. If you're between two sizes, write to us — we'll tell you what to pick.

Section · Sofa

Sofa Covers.

Five sub-categories for the sofa you already own — stretch covers, throws, non-slip protection, cushion covers, and convertible sofa beds. Pick the type, then the size.

Sofa covers · Stretch fit

Sized for the sofa you already own.

Stretch covers for straight, L-shape and U-shape sofas. Measure arm to arm and pick the closest size.

Measure the length (arm to arm) and the width (front to back).
  1. Measure A→B for the width (front to back of the seat).
  2. Measure C→D for the length (arm to arm).
  3. Match to the closest size below — go up if between two.
  4. For L-shape and U-shape sofas, order one cover per piece.
Size
Length (arm to arm)
Best for
1-Seater
90–140 cm
Armchairs and small loveseats
2-Seater
145–185 cm
Standard two-seat sofa
3-Seater
190–230 cm
Most common straight sofa
4-Seater
235–300 cm
Long sofas, sectional pieces

What's in the box

1 stretch cover, sized as listed. Machine-washable cold (max 30°C). Stretches up to 35 cm seat depth.

When to choose

One cover per order. 1-Seater for armchairs (90–140 cm). 2-Seater for two-seat sofas (145–185 cm). 3-Seater for the main living-room sofa (190–230 cm). 4-Seater for long sofas (235–300 cm). For L-shape or U-shape sofas, order one cover per piece — typically two for L-shape, three for U-shape.

Between two sizes? Go up — the stretch fabric grips better with extra coverage.

Sofa covers · Drape on top

A throw, draped over the sofa.

Throws sized to drape — measure the visible top of your sofa and pick the closest match.

Measure the visible top of your sofa, then add the drop you want on each side.
  1. Measure C→D along the length (arm to arm, top of the seat).
  2. Measure A→B along the width (front to back).
  3. Pick the size that matches the visible surface.
  4. For L-shape or U-shape sofas, order one throw per piece.
Size
Width × Length
Best for
Armchair · Compact
180 × 90 cm
Single armchair seat
Armchair · Wide
180 × 130 cm
Deep armchair, narrow loveseat
2-Seater · Compact
180 × 150 cm
Loveseat, compact 2-seater
2-Seater · Standard
180 × 180 cm
Standard 2-seater sofa
3-Seater · Compact
180 × 230 cm
Compact 3-seater
3-Seater · Standard
180 × 260 cm
Standard 3-seater
4-Seater · Compact
180 × 280 cm
Compact 4-seater
4-Seater · Standard
180 × 300 cm
Standard 4-seater
XL · Standard
180 × 340 cm
Long XL sofa
XL · Wide
180 × 380 cm
Extra-wide XL sofa
XL · Sectional
180 × 420 cm
Largest L-shape or U-shape piece

What's in the box

1 throw, woven on both sides. Hand-washable. The throw stays in place by drape and weight.

When to choose

One throw per order. Armchair: 90 or 130 cm length. 2-Seater: 150 or 180 cm. 3-Seater: 230 or 260 cm. 4-Seater: 280 or 300 cm. XL: 340–420 cm. For L-shape or U-shape sofas, order one throw per piece.

A throw should drape — pick a longer length if you want a generous fold over the sides.

Sofa covers · Stay-put protection

A cover that stays in place.

Sold individually — one piece per order. Sixteen dimensions, three widths. Mix and match to cover what you need: armrests, seat cushions, backrest, or a single large format draped over a sectional.

Measure each section of your sofa separately — armrests, seat, backrest.
  1. Measure A→B for the width (front to back of the seat).
  2. Measure C→D for the length (arm to arm of the seat).
  3. For armrests, measure each one separately.
  4. Order one piece per section, or pick a single large format to drape over a sectional.
Width
Available lengths
Best for
70 cm wide
70 · 120 · 150 · 180 · 210 cm
Armrests, narrow seat sections
90 cm wide
70 · 90 · 120 · 160 · 180 · 210 · 240 cm
Standard seat cushions
110 cm wide
110 · 160 · 180 · 210 · 240 cm
Wide seats, sectional draping

What's in the box

Sold individually — one piece per order. Each piece is anti-slip backed and machine-washable. Sixteen dimensions available across three widths (70 cm, 90 cm, 110 cm).

When to choose

One piece per order. To cover the whole sofa, order multiple pieces — typically: 2 armrests (70×70 cm) + 1 seat cushion (90 cm or 110 cm wide × length matching sofa) + 1 backrest (70 cm wide). Or pick a single large format like 110 × 240 cm to drape over a sectional in one piece.

To cover the whole sofa, order multiple pieces. Or pick a single large format (e.g. 110 × 240 cm) to drape over a sectional in one piece.

Sofa covers · Cushions only

Refresh the cushions, not the sofa.

Nine sizes for the cushions you already have. Two width ranges (50–65 cm Standard, 65–95 cm Plus) and a backrest cover sized separately.

Measure each cushion separately — width (front to back), length (left to right).
  1. Measure W (width, front to back) — Standard 50–65 cm or Plus 65–95 cm.
  2. Measure L (length, left to right).
  3. Order one cover per cushion.
  4. The backrest cover is sized separately (30–50 × 60–90 cm).
Size
Width × Length
Best for
Seat XS
50–65 × 50–70 cm
Compact armchair seat
Seat S
50–65 × 100–125 cm
Loveseat seat cushion
Seat M
50–65 × 150–185 cm
3-seater seat cushion
Seat L
50–65 × 230–280 cm
4-seater seat cushion
Seat Plus S
65–95 × 65–95 cm
Wide armchair seat
Seat Plus M
65–95 × 95–135 cm
Wide loveseat
Seat Plus L
65–95 × 135–165 cm
Wide 3-seater
Seat Plus XL
65–95 × 165–200 cm
Wide 4-seater / sectional
Backrest
30–50 × 60–90 cm
Standard backrest, all sizes

What's in the box

1 cushion cover, sized for one seat cushion. Hand-washable. Standard fits depths 50–65 cm. Plus fits depths 65–95 cm.

When to choose

One cover per order. Order one Seat cover per cushion: 2-Seater = 2 covers, 3-Seater = 3 covers. Add 1 Backrest cover if you want to refresh the back too. For very wide cushions (over 95 cm width), see Seat Plus 4XL on selected products.

Between Seat S and Seat M? Pick the longer length — the cover stretches over but a too-short cover bunches.

Sofa covers · Convertible sofas

For the sofa that opens up.

Stretch covers for sofa beds — two sizes only. Measure in the closed position, arm to arm.

Measure your sofa bed in the closed position, arm to arm.
  1. Close the sofa bed fully before measuring.
  2. Measure E (seat width, left to right) — this is the main reference.
  3. Pick S if your sofa bed is 150–190 cm wide.
  4. Pick L if it's 190–210 cm wide.
Size
Width range (E)
Best for
S
150–190 cm
Single, loveseat and standard sofa beds
L
190–210 cm
Larger sofa beds, click-clack frames

What's in the box

1 stretch cover, sized to flex when the bed opens. Machine-washable.

When to choose

One cover per order. S (150–190 cm) for most single, loveseat and standard sofa beds. L (190–210 cm) for larger frames and click-clack styles. If your sofa bed is wider than 210 cm, write to us — we'll find a custom solution.

The cover stretches — if you're between S and L, go down for a tighter fit.

Section · Chair

Chair Covers.

Four sub-categories for the chair you already own — dining chairs, contemporary armchairs, club & tub chairs, and wingback & bergère armchairs. Pick the shape, then measure.

Chair covers · Dining

One fit, every chair at the table.

One stretch cover, sized for most dining chairs. The fabric grips the back, the seat, and the skirt — adapts to small differences in height and width.

Measure the back, the seat, and the skirt height.
  1. Measure the back width (38–50 cm typical).
  2. Measure the back height (60–70 cm typical).
  3. Measure the seat depth (38–50 cm typical).
  4. Measure the skirt height (18–25 cm typical).
Size
Back × Seat × Skirt
Best for
One Size
Back 38–50 cm × Seat 38–50 cm × Skirt 18–25 cm
Most standard dining chairs

What's in the box

1 stretch cover, sized for one chair. Machine-washable.

When to choose

One cover per chair. One Size fits the vast majority of dining chairs — straight backs, slightly curved backs, standard seat depths. For taller chairs (back over 75 cm) or wider chairs (over 55 cm), write to us — we may have a custom alternative.

If your chair is unusually tall (back over 75 cm) or wide (over 55 cm back), write to us before ordering.

Chair covers · Modern armchair

Refresh the chair, not the chair.

One stretch cover sized for contemporary armchairs — modern silhouettes, rolled or square arms, standard heights.

Measure the back, the depth, and the armrest height.
  1. Measure the back width (80–120 cm typical).
  2. Measure the back height (78–104 cm typical).
  3. Measure the depth (80–95 cm front to back).
  4. Note the armrest thickness (5–23 cm).
Size
Back × Height × Depth
Best for
One Size
Back 80–120 × Height 78–104 × Depth 80–95 cm
Standard contemporary armchair

What's in the box

1 stretch cover, sized for one armchair. Machine-washable.

When to choose

One cover per armchair. One Size fits most modern armchairs. For very large or wingback styles, see Wingback & Bergère.

If your armchair has thick rolled armrests, the stretch fabric will adapt — no upsize needed.

Chair covers · Club & tub

For the chair with curved arms.

Stretch covers for tub-style and club armchairs — curved silhouettes, single-piece backs, low arms.

Measure the seat width, the back height, and the depth.
  1. Measure the seat width (55–60 cm typical).
  2. Measure the back height (60–90 cm typical).
  3. Measure the front skirt height (20–35 cm).
  4. Measure the overall depth (60–70 cm).
Size
Seat × Back × Depth
Best for
One Size
Seat 55–60 × Back 60–90 × Depth 60–70 cm
Standard tub or club armchair

What's in the box

1 stretch cover with curved back panel, sized for one tub or club armchair. Hand-washable.

When to choose

One cover per armchair. One Size fits tub-style and club armchairs. The cover stretches around curved arms — measure the back at its tallest point.

The cover stretches around curved arms — measure the back at its tallest point.

Chair covers · Wingback

For the chair with wings.

Water-repellent covers for wingback and bergère armchairs — sized to fit the wings, the back, and the depth.

Measure the back across the wings, then the height.
  1. Measure the back width across the widest point (70–80 cm typical).
  2. Measure the back height (95–110 cm typical).
  3. Measure the overall depth (80–92 cm).
  4. Choose water-repellent if the chair sees daily use.
Size
Back × Height × Depth
Best for
One Size
Back 70–80 × Height 95–110 × Depth 80–92 cm
Standard wingback or bergère

What's in the box

1 water-repellent cover with separate panels for the wings, sized for one wingback or bergère. Machine-washable.

When to choose

One cover per armchair. One Size for wingback and bergère armchairs. Choose water-repellent if the chair sees daily use, pets, or kids.

Tall wing-tops pull the cover slightly — measure to the highest wing point, not the seat back.

Section · Bedding

Bedding.

Two sub-categories for the bed — fitted sheets sold separately, and complete bedding sets with duvet cover, pillow shams, flat sheet, and fitted sheet. Match to your mattress size.

Bedding · Fitted sheets

One sheet, fits the mattress.

Fitted sheets sold individually, sized to standard mattress dimensions. Stretches up to 35 cm depth.

Measure your mattress before buying. Allow 1–2 cm difference for manual measurement.
  1. Measure the mattress length (A) and width (B).
  2. Confirm the mattress depth (fits up to 35 cm).
  3. Match to the closest size below.
  4. The pack includes the fitted sheet only — no pillow shams.
Size
Sheet dimensions (A × B)
Best for
Twin / Single
160 × 220 cm
Single mattress
Full / Double
200 × 230 cm
Double mattress
Queen
230 × 230 cm
Queen mattress
King
230 × 250 cm
King mattress

What's in the box

1 fitted sheet, no pillow shams. Stretches up to 35 cm depth. Machine-washable cold.

When to choose

One sheet per order. Twin/Single for single mattresses. Full/Double for double. Queen for queen. King for king. If between two sizes, go up.

If your mattress is between two sizes, go up — too small won't fit at all.

Bedding · Complete set

Everything for the bed, in one box.

Each set includes 1 duvet cover, 2 pillow shams, 1 flat sheet, and 1 fitted sheet. Match to your mattress size.

Each set includes 1 duvet cover, 2 pillow shams, 1 flat sheet, and 1 fitted sheet.
  1. Measure your mattress (length × width × depth).
  2. Choose the size that matches your bed frame.
  3. Allow 1–2 cm difference for manual measurement.
  4. Pillow shams fit standard pillows (50 × 66 cm or larger).
Size
Duvet cover dimensions
What's included
Twin
Duvet 173 × 229 cm
Single bed — duvet, 2 shams, flat, fitted
Full
Duvet 203 × 229 cm
Double bed — duvet, 2 shams, flat, fitted
Queen
Duvet 229 × 229 cm
Queen bed — duvet, 2 shams, flat, fitted
King
Duvet 264 × 229 cm
King bed — duvet, 2 shams, flat, fitted
Cal King
Duvet 229 × 244 cm
California King — duvet, 2 shams, flat, fitted

What's in the box

1 duvet cover, 2 pillow shams (50 × 66 cm or larger), 1 flat sheet, 1 fitted sheet. Machine-washable. Sold as a complete set.

When to choose

Twin for single beds. Full for doubles. Queen for queen mattresses. King for kings. Cal King for Californian king. Pick the size that matches your bed frame, not just the mattress.

If you sleep with a duvet thicker than 10 cm, choose one size up — the cover slips off otherwise.